You are someone on the verge of constructing your dream project, it can be a personal space or a professional setup. But you are wondering what if the pipe bursts and starts flooding. What if the quality is not good and they are weak and cheap? In this blog of Rithvik Pipe, the best PVC Pipe Manufacturers in Kerala will explain how to identify the best quality PVC pipes for your construction project.
Why pipe quality matters?
Think of PVC pipes just like a straw for drinking. A good straw will allow you to drink properly. A bad straw can create problems. Let’s see what happens when the quality of your pipe is bad:
-
Leaks and Bursts
Every pipe will have a pressure as per the capacity of the material. If the quality is compromised when the pressure of water pumped is high, there are high chances. It can’t take the stress and can easily burst up, flooding your walls and floors.
-
Clogs and blockages
Pipes must handle all kinds of waste materials, from junk and hair to any other substance. Good pipes are smooth on the inside, allowing everything to flow easily. Bad pipes, however, are rough. When the interior is not smooth, substances can easily get trapped.
-
Chemical leaching
Poor quality pipes are easily bled or leak around. This causes health hazards also as the water will not be fit for human use.
-
Short lifespan
The quality determines the durability of the pipe. After a certain period, it slowly becomes brittle. The life span of a PVC pipe is determined by the quality it delivers. A small shift in the ground or a tiny impact can be a reason for a crack.
-
Expensive
Investing in a good-quality pipe from the start is essential. If you don’t, it will lead to costly repairs and replacements. A good pipe acts like a life-saver. Good pipes are a one-time investment, while bad pipes are a recurring headache that continues to cost you money. Remember, the cost of fixing a problem is far higher than the few rupees you save upfront.
What are the essential qualities for a PVC Pipe?
ISI mark:
The top mark of quality assurance is the ISI standard. This government-approved mark guarantees that a product is genuine and trustworthy. Furthermore, a simple physical inspection can help you determine if the product has the necessary quality.
Thickness:
The wall thickness of the pipe is evaluated by feeling the end; a quality pipe should have a wall that is thick, even, and dense, suggesting robustness and durability.
Strength:
The strength of the pipe is essential to inspect and determine the strength of the pipe. Two tests can be done. One is the tap test, and the cling sound indicates it is good. A thud test indicates as a black mark. A pipe that is difficult to bend is deemed appropriate for pressure applications, while flexibility suggests it is unsuitable for such uses.
Finishing Touches:
The surface of the pipe is very smooth and shiny, both interior and exterior. High-quality pipe should feel as smooth as possible. The friction and roughness indicate that the pipe is waste getting clogged inside.
Application of Quality PVC pipes for your construction Project
PVC pipe can be applied to any type of construction work, and some of them are listed below:
Water Supply:
- Potable Water (Drinking)
- Raw Water
Drainage and Sewage:
- Wastewater
- Sewage
- Storm water (Rainwater harvesting and flood prevention)
Construction:
- Plumbing
- Conduit
- Structural
Industrial:
- Process Piping
- Compressed Air
Utilities and Infrastructure:
- Gas Distribution
- Telecommunications
Agriculture:
- Irrigation
Environmental:
- Land drainage
How can we choose the best type based on the application of PVC Pipe?
Not all PVC pipes are the same. Picking the right one is crucial.
- Drinking purpose: The quality of the pipe plays a crucial role in the availability of clean and potable water. Therefore, always look for the sign “potable” or “drinking water” indication on the pipe.
- For Underground Sewers: Choose the thicker, heavier pipes designed for sewer lines.
- Electrical Wires: For electrical purposes, it is advisable to use grey conduit pipes. Some people confuse them with standard water pipes, but they are not the same.
A construction does not just happen the fluke, always tell your supplier where you are using the pipe and the purpose of it.
If you are someone who would like to know the best pipes, approach the team of Rithvik Pipe, who offer the Best PVC Pipes in Kerala. It is always better to recap that a few minutes of checking markings, texture, and strength can save you from major trouble. To build smart and build last, partner with us. Please visit the website of Rithvik Pipe for more details.
